Concrete - a super material


Husqvarna Superfloor™
Husqvarna Superfloor™ is a process of mechanically grinding the surface in several steps, using finer and finer diamond tools, making a finished floor with the structural concrete.
The floor surface that is achieved has many beneficially properties, the most prominent being:
- Cost-effective solution
- Long service life
- A sensible choice from a sustainability perspecitve
- Easy maintenance.
The advantages are many, however there are also limitations and challenges that are important to be aware of as the owner or specifier of a Husqvarna Superfloor™ as this is a method for refining an existing floor. Right now you many find yourself on a concrete slab that has the possibilities of being refined.

Every floor is unique
Concrete is a natural material which means that every concrete floor is unique. That is due to the infinite possible compositions of stone, sand, cement, water and additives. High demands are placed on the contractor that creates a Husqvarna Superfloor™, but there are some things that are difficult and sometimes impossible for contractors to influence.
In this section of the web page you will find the most common challenges. Even though they all affect the visual appearance in some way, it’s important to note that none of these are affecting the floor’s good properties or function.

1. Stone and aggregate exposure
A Husqvarna Superfloor™ is ground with Husqvarna’s floor grinding machines and diamond tools on a new or old concrete slab. As a grinding contractor you cannot change how the aggregate (stone) is distributed. This means that in some areas, there might be more aggregate exposed than in others, although the floor is ground to the same depth all over.
All the positive properties of the floor are still the same, but if it is important to have a floor where stones have a more controlled distribution, we suggest another type of floor such as terrazzo, cementitious toppings or tiles instead.

2. Cracks and Crazing
When concrete is poured, it develops internal stresses as it hydrates and sets. This is completely natural and causes the concrete to crack. On new production it is possible to control or minimize these cracks. Both by controlled hydration, but also by relieving the built up stress before the concrete seek its own relief in the form of a random crack by using the Soff-Cut® system. However, on existing floors you have to work with what you have. You cannot make cracks disappear, but it is possible to repair and to some extent conceal them (with the help of for example GM 3000). Even if there are cracks, the floor with have good function.

3. Pores
Air bubbles can be reduced by correct vibrations and trowelling during placement. Grinding will expose air voids, however it is possible to fill pores during the grinding process (for example with the help of GM 3000). All pores will not be filled but the surface will be a lot more homogeneous. Even if there are pores in the surface the floor will have good function.

4. Different concrete mixtures in the same slab
In some cases concrete with different properties is delivered to the same concrete slab, which lead to visual differences. There might be several reasons to why this can happen, but it doesn’t affect the function of the floor.

5. Edges
Edge grinding can be a great challenge and is often very time consuming. There are alternative solutions on how to handle edges depending on how the facility will be used. It is crucial to discuss and agree upon how to handle edge grinding along walls, pillars and other fixed obstacles before the work has begun.

6. Protection against stains
A very important feature of a Husqvarna Superfloor™ is the diffusion open surface. It is water vapour permeable, meaning it “breathes”. Any moisture in the concrete, or from underground, can evaporate which prevents moisture damages, mould or bad smell from occurring.
The downside of this is that spills of oil, coffee and other fluids can easily penetrate into the concrete and create stains. If an increased resistance against stains is desired, we recommend treating the floor with a product from Husqvarna Floor Protection System, for example the Premium Guard SB. A slight color change may occur with the treatment, so we recommend testing a small, inconspicuous area first.
There are a variety of products within Husqvarna’s Floor Protection System, all with different features to meet each need. However, none of them are completely water proof since this will affect the permeability described above. Therefore, in areas with a lot of spillage a completely water tight floor material may be preferable.

7. Etch marks
Newly polished concrete floors may be more sensitive. Avoid letting residual water in the form of pools/rivulets dry out/evaporate as this can cause a reaction in the form of efflorescence (white powdery spots) or permanent etch marks in the surface.
The sensitivity decreases over time and after approximately 2 months, reactions are not likely. However, large quantities of liquids should not be left to dry on the floor as a Husqvarna Superfloor™ is not a sealed floor.
Moisture migration can result in efflorescence on the surface. Concrete does not withstand corrosive substances such as strong acids or alkalis, which must be removed immediately.

8. Maintenance
The binder in concrete contains various forms of lime (calcium silicate hydrate and calcium hydroxide) which have a naturally high pH value. Aggressive cleaning agents might break down the lime. So in order to maintain the gloss of the floor and the easy-to-clean properties, no aggressive cleaning chemicals should be used. If aggressive chemicals are used they can over time deteriorate the gloss and smoothness and make the floor more difficult to clean.
Our recommendation for cleaning of Husqvarna Superfloor™ is to use diamond impregnated pads, such as Hiperclean™ pads, and tap water and/or microfiber mop. This way, the floor is cleaned and maintained in the most environmentally friendly way and with an optimal result.

9. Sample area
Every Husqvarna Superfloor™ is unique thanks to the concrete being a natural material with endless variations. Thus there may be reasons for the grinding contractor to deviate from the normal process. These deviations should be communicated to the customer and be noted in the Superfloor Object Report or a project deviation report or similar.
The best way to find out what the properties of the concrete will look like on your specific floor is to make a test area at an early stage and evaluate the best process for you and your floor.