HUSQVARNA CONSTRUCTION PRODUCTS NORTH AMERICA, INC. LIMITED WARRANTY
Husqvarna Construction Products North America, Inc. (“Husqvarna” or “we”) warrants that this product is free from defects in material or workmanship under normal use and maintenance. We will, at our option, repair or replace any defective product or defective part covered by the Limited Warranty, free of charge at any authorized Servicing Dealer/Center using OEM replacement parts, subject to the limitations and exclusions described below.
Limited Warranty Period. We will warrant the product to the original retail purchaser from the date of retail purchase for the applicable period of time shown on the chart below. Husqvarna products covered by our Limited Warranty (as identified as such in the chart below) are warranted against defects in material or workmanship as reasonable determined by Husqvarna and in compliance with applicable law. This Limited Warranty is only valid while product is owned by the original purchaser.
What is NOT covered. This Limited Warranty does not cover:
- Replacement of normal wear parts (parts and items that normally wear out with use), including without limitation air filters, belts, blades, blade adapters, brake arms, brake linings, brushes, bulbs, fuel, fuel filters, lubricants, oil filters, scraper blades, shear bolts/pins, skid shoes, spark plugs, and starter cords.
- Emissions control equipment and components to the extent regulated by the U.S. Environmental Protection Agency or similar government agencies. These are covered by a separate emission control warranty contained in the operator's manual packet.
- Damage, malfunctions or failures resulting from abuse or neglect of the product related to or including any of the following:
i. Failure to provide or perform required maintenance services as prescribed in the operator’s manual.
ii. Abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, improper transportation, improper/unauthorized application, use of unauthorized attachments, lack of lubrication or engine failure due to the use of oils that do not meet engine manufacturer's specifications.
iii. Use of gasohol (fuel containing ethanol) or gasoline containing methanol (fuel containing wood alcohol). Ethanol fuel E15 or E85 is NOT approved for use in Husqvarna products. Using E15 or E85 fuel will cause major engine damage which is NOT covered by this Husqvarna warranty. Note: Gasohol (fuel containing ethanol) which contains a maximum 10% ethanol (grain alcohol) is approved.
iv. Damage caused by old fuel, stale fuel, or bad fuel.
v. Use of ether or any starting fluids.
vi. Pressure cleaning or steam cleaning the product.
vii. Use of spark plugs other than those meeting emission performance requirements listed in the operator’s manual.
viii. Tampering with engine speed governor or emission components, or running engines above specified and recommended engine speeds as in your operator's manual.
ix. Operation of the unit with improperly installed, removed, or modified cutting shields, guards or safety devices.
x. Any removed, damaged air filter, excessive dirt, abrasives, salt water, moisture, corrosion, rust, varnish, dirt contaminated grease or oil, use of incorrect type of grease or oil, failure to comply with regular greasing intervals or any adverse reaction due to incorrect storage procedures.
xi. External causes such as accidents or other actions or events beyond Husqvarna’s reasonable control. - Damage or failures due to improper set up, pre-delivery service or repair service by anyone other than a Husqvarna authorized servicing dealer during the warranty period.
- Batteries that are part of a first sale with a date of manufacture greater than 12 months (non BLi batteries)
- Batteries that are part of scratch & dent purchases and/or prior model year sales, including discounted units.
- Engines (engines are warranted by the engine manufacturer).
Your Responsibilities. To preserve your rights under this Limited Warranty, you must exercise reasonable care and use of the product, including following the preventive maintenance, storage, and fuel and oil usages as prescribed in the operator's manual. Failure to perform required maintenance as described in the operator's manual will void this warranty. Any adjustment (e.g. to the throttle cable or belt guides) after the first ninety (90) days of purchase and any preventive maintenance as outlined in the operator's manual are NOT covered by this warranty. In addition, you must cease using the product immediately upon any failure or damage and take the product to an authorized servicing dealer prior to any further use.
WARRANTY EXCLUSIONS, DISCLAIMERS, AND LIMITED RIGHTS. WE WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT. YOUR REMEDY IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT OR PART, AT OUR DISCRETION. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SET FORTH HEREIN . ANY WARRANTY IMPLIED BY STATE LAW (WHETHER OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR OTHERWISE) IS HEREBY DISCLAIMED; WHERE SUCH A DISCLAIMER IS NOT PERMITTED BY LAW, THEN SUCH IMPLIED WARRANTY IS LIMITED FOR THE DURATION OF THE APPLICABLE LIMITED WARRANTY PERIOD LISTED IN THE CHART BELOW. SOME LOCALITIES, INCLUDING THE PROVINCE OF QUEBEC, DO NOT ALLOW EXCLUSIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS BASED ON YOUR LOCALITY.
How to obtain service. To obtain warranty service, you must take your product to an authorized Servicing Dealer/ Center. To find your nearest authorized Servicing Dealer/ Center, visit our website and use the Dealer Locator feature or call 1-800-288-5040 from 8:00 AM to 5:00 PM EST. Any costs to transport or ship the product are your responsibility. You must present proof of purchase (including date, product model and serial number) to an authorized Servicing Dealer/ Center for warranty service. Proof of purchase rests solely with you. You may register your product using our online product registration site to help ensure that you are notified of important product information. However, registering your product is not a condition of warranty service.
Husqvarna Product Model |
Warranty Duration |
---|---|
POWER CUTTERS | |
K 760 cut-n-break | 1 year |
K 770 | 1 year |
K 970 | 1 year |
K 1270 | 1 year |
K 40 | 1 year |
K 4000 | 1 year |
K 7000 | 1 year |
K 535i, K 540i | 1 year |
K 1 PACE | 1 year |
K 3600 MK II | 2 years |
K 2500 | 2 years |
MASONRY SAWS | |
MS 610, MS 360 | 2 years |
TS 70, TS 60 | 2 years |
WALL & WIRE SAWS | |
WS 8, WS 440 HF, WS 482 HF, WS 463 | 1 year |
WSC 40 | 1 year |
CS 10, CS 2512 | 1 year |
EARLY ENTRY SAWS | |
Soff-Cut® 150, 150 D, 150 E, 2000, 2500, 4000, 4200, 5000 | 1 year |
FLAT SAWS | |
FS 3500 E, 3500 G, 4600 G, 5000 D, 7000 D, 7000 DL | 2 year (gearbox limited to 1 year) |
RS 7400 D | 2 year (gearbox limited to 1 year) |
FS 309, FS 400, 413, 513, 520, 524, 600 E | 1 year |
POWER PACKS & GENERATORS | |
PP 8, PP 70, PP 325 E, PP 518 | 1 year |
P 16kVa | 1 year |
DEMOLITION ROBOTS | |
DXR 95, DXR 145, DXR 275, DXR 305, DXR 315 | 1 year |
DXR accessory | 1 year |
DRILLING SYSTEMS | |
DMS 180, 240, 400, 430 | 2 years |
DM 1 PACE & K 540i | 2 years |
DM 200, 220, 230, 400, 430, 406 H, 700 | 2 years |
HAND GRINDER | |
HG 7 BLC, 7 BLF | 120 days |
HG 125 VS, 125 B | 120 days |
DUST & SLURRY MANAGEMENT | |
T 1800, 4000 P, 7500, 8600, 8600 P, 10000 | 2 years |
DC 6000 | 2 years |
HTC D 60, D 80 | 2 years |
S 11, 36 | 2 years |
DE 110, 110i H, 110 SH, 120 H, 120 H PACE | 2 years |
W 70, 70 P, 250 P | 2 years |
C 3000, 5500 | 2 years |
A 600, 2000 | 2 years |
BLASTRAC VACUUMS | |
DC-655 3ph | 2 years |
DC-975 3ph | 2 years |
2-48DC 3ph | 2 years |
EBE-900DE 3ph | 2 years |
PULLMAN HOLT VACUUMS | |
102 Big Red 1ph | 2 years |
102 Dry 1ph | 2 years |
86 Dry 1ph | 2 years |
45-20 P Wet 1ph | 2 years |
45-20 POV 1ph | 2 years |
390 1ph | 2 years |
COMPACTION EQUIPMENT | |
LT 5005, 6005 | 2 years |
LF 50 L, LFe 60 LAT, LF 60i LAT, LF 60 LAT, LF 75 LAT, LF 80 LAT, LF 100 LAT |
2 years |
LG 164, 204, 300, 400, 504 | 2 years |
LP 9505 | 5 years |
CONCRETE VIBRATORS | |
Smart 56-10M, 5M | 2 years |
Smart 48-10M, 5M | 2 years |
Smart 40 | 2 years |
Smart E 40, 48, 56 | 2 years |
AME 1600 | 2 years |
CONCRETE SCREEDS | |
BV 20 H, 20 G, 30, 30i | 2 years |
BT 90 | 2 years |
WALK BEHIND TROWELS | |
CT 36-5A, 36-8A, 36-8-V, 48-8A, 48-13A, 48-13A-V | 2 years |
BG 245 | 2 years |
RIDE-ON TROWELS | |
CRT 60X, 48, 36 | 2 years |
FLOOR GRINDERS | |
PG 540, 690, 690 RC, 830, 830 S, 830 RC | 2 years |
PG 280, 400, 450, 510 | 1 year |
PG 690 P, 830 P | 2 years |
HTC T5, T6, T8, X8, RX8 | 2 years |
HTC 270 | 1 year |
BMG 250, 555, 780 | 2 years |
BMG 2200 | 1 year |
SCARIFIERS | |
CG 200 | 2 years |
SCRAPERS | |
BMS 220 ADB, 220, 280 | 1 year |
BS 75, 110 | 1 year |
SHAVERS | |
BMP 4000 RC | 2 years |
BMC 335 RC, 335 | 2 years |
SHOT BLASTERS | |
BMR-25, 75 | 1 year |
2-48DS | 1 year |
2-20DTMKII, 2-30DS | 1 year |
1-15DSGI, 1-10DSGI, 1-10DPS75, 1-8DPS30, 1-8DM | 1 year |
200VMB, 900VMB | 1 year |
500E | 1 year |
350E | 1 year |
BATTERIES | |
Lead acid batteries | 90 days |
BLi and PACE batteries | 2 years |
DIAMOND TOOLING | |
1 year | |
SPARE PARTS | |
Husqvarna sold and mounted spare parts on a product by an authorized Distributor are covered by a warranty period of ninety (90) days, under the condition that the part has been subject to normal use and maintenance according to the product's Operator Manual. The same conditions as to regular warranty will apply, meaning that Spare Parts Warranty will only be accepted if a Husqvarna genuine part is deemed as caused by faulty design, material, and workmanship. The mounted spare part must also be the cause of the repair needed. If the spare part is broken as a consequential damage, the Spare Part Warranty does not apply. |